Maintenance And Storage - LEMAN LOCSE300 Manual De Instrucciones

Installation:
- Place the device on a flat, horizontal and hard surface.
- Keep a space of at least 1 meter all around the device.
- If necessary, loosen the 2 hinge knobs (2), tilt the fan heater in the desired direction, and tighten the 2 knobs.
Turning on the unit:
Before connecting the unit, check the function switch (4) is on the "Off" position (4a) marked O.
- Plug on the device.
- Select the function with the switch button (4):
- Position (4b): fan only.
- Position (4c): heating with ventilation.
Setting the heating power:
Turn the thermostat knob (6):
- Clockwise to increase the temperature.
- Anticlockwise to decrease the temperature.
Switching off:
- Turn the selector (4) to position (4a) marked O.
- Remove the mains plug.
! Danger! Before any operation of maintenance or cleaning, disconnect the mains plug. The unit must in any case
be on.
! Danger! Risk of burns! Before any operation of maintenance or cleaning, wait until the unit has completely
cooled (approx. 30 minutes).
Maintenance and Cleaning:
- Perform regular maintenance to avoid appearance of undesirable problems.
- Do not use water, solvents or detergents nor abrasive or corrosive products to clean the machine: use a brush, a
lint-free damp cloth, a vacuum cleaner, or a blower.
- Perform a thorough cleaning after each use to avoid waste accumulation on the device. Immediate cleaning
prevents the formation of an agglomerate that it will be more difficult to remove later, and especially avoid the
appearance of corrosion.
- The unit must be kept clean to avoid premature deterioration and wear.
- Periodically, depending on frequency of use, check all screws and tighten them if necessary.
Transport of the machine:
- Unplug the appliance.
- Wait until the unit has completely cooled.
Storage:
- Unplug the power plug from the sector.
- Wait for the machine to cool completely before cleaning and then store it.
- Store the unit so that it can not be used by an unauthorized person.
- Store the machine so that no one can get hurt.
- Always store the device in a dry and protected
Do not dispose of electric tools together with household waste material!
In observance of European Directive on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
GB

MAINTENANCE AND STORAGE

DISPOSAL
10