Brandson Equipment 306570 Manual Del Usuario página 19

Schedule:
Select the time when the unit should start watering. Then select the watering
duration and finally the days on which schedule the unit should operate.
Cycle (time loop)
You can set the start time and the end time of the watering period.
Then select the corresponding days on which the unit is to operate.
Then select the watering duration and the pause duration after watering.
9. Installation at the water connection
Connect the Water Computer to a water tap. If necessary, use PTFE sealing
tape around the thread of the tap.
You can now operate devices of your choice on the hose connection.
10. Manual watering
The unit gives you the option to water manually without interrupting the
programmed schedule. Manual watering is used to test equipment, to run
an additional watering cycle in an area or to use the tap without removing
the timer. Press the ON/OFF button to activate manual watering. You can set
how long the preset manual cycle should run via the app.
11. Stop water flow
You can stop the water flow at any time, either during manual watering or
during a programmed time. Press the ON/OFF button once to stop watering.
19
English