Craftsman 351.215000 Manual De Instrucciones página 2

Warranty ......................................... 2
Safety Rules .................................... 2-3
Unpacking ....................................... 3
Assembly ...................................... 3-4
Installation ...................................... 4-5
Operation ...................................... 5-6
Maintenance ..................................... 6
Troubleshooting ................................... 7
Parts Illustration and List .......................... 8-9
EspaSol ...................................... 12-19
ONE-YEAR FULL WARRANTY ON CRAFTSMAN
TOOL
If this Craftsman tool fails due to a defect in material or work-
manship within one year from the date of purchase, call 1-
800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR (or
replacement if repair proves impossible). This warranty does
not include expendable parts, such as lamps, batteries, bits or
blades.
If this tool is ever used for commercial or rental purposes, this
warranty will apply for only 90 days from the date of purchase.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
WARNING: For your own safety, read all of the instructions
and precautions before operating tool.
WARNING: Some dust created by power sanding, sawing,
grinding, drilling and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
* Lead from lead-based paints.
* Crystalline silica from bricks and cement and other mason-
ry products.
* Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often
you de this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with
approved safety equipment. Always wear OSHA/NIOSH
approved, properly fitting face mask or respirator when using
such tools.
CAUTION: Always follow proper operating procedures as
defined in this manual even if you are familiar with use of this
or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
BE PREPARED FOR JOB
* Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
* Wear protective hair covering to contain long hair.
* Wear safety shoes with non-slip soles.
* Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lenses.
They are NOT safety glasses.
* Wear face mask or dust mask if operation is dusty.
* Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE WORK AREA FOR JOB
* Keep work area clean. Cluttered work areas invite accidents.
* Do not use power tools in dangerous environments. Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
* Work area should be properly lighted.
* Proper electrical receptacle should be available for tool.
Three-prong plug should be plugged directly into properly
grounded, three-prong receptacle.
* Extension cords should have a grounding prong and the three
wires of the extension cord should be of the correct gauge.
* Keep visitors at a safe distance from work area.
* Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
* Always unplug tool prior to inspection.
* Consult manual for specific maintaining and adjusting
procedures.
* Keep tool lubricated and clean for safest operation.
* Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
* Keep all parts in working order. Check to determine that the
guard or other parts will operate properly and perform their
intended function.
* Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condition
that may affect a tool's operation.
* A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
KNOW HOW TO USE TOOL
* Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
* Disconnect tool when changing sanding drum.
* Avoid accidental start-up. Make sure that the tool is in the
"OFF" position before plugging in.
* Do not force tool. It will work most efficiently at the rate for
which it was designed.
* Keep hands away from moving parts and sanding surfaces.
* Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
* Do not overreach. Keep proper footing and balance.
* Never stand on tool. Serious injury could occur if tool is
tipped or if belt or disc are unintentionally contacted.
* Know your tool. Learn the tool's operation, application and
specific limitations.
* Use recommended accessories (refer to page 9). Use of
improper accessories may cause risk of injury to persons.
* Handle the workpiece correctly. Protect hands from
possible injury.
© Sears, Roebuck and Co.
2