Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Quick Start Guide
Power on & Paring
1. Long press key "4" for about 2 seconds to turn on the headset. If
there is pairing history, the headset will auto-reconnect to its last
connected device. Otherwise, you will hear voice "paring" and it
will go in pairing mode. In pairing mode, Bluetooth devices, such as
mobile phones, can locate and connect to the headset.
2. Manual pairing: long press key "4" for 6 seconds to let the headset
automatically go in pairing mode.
3. The headset should go into pairing mode and the LED will alternate
between flashing red & blue. Turn on the phone's Bluetooth and set
it to discoverable state, you could add or locate a new device to
connect. Select "SOMIC G810" in the device list and pair it with your
device. When you hear voice "connected", it means the pairing is
completed. You will see the blue indicator light flashes slowly.
4. Pairing with Bluetooth Transmitter: in the paring mode, insert
Bluetooth transmitter into Type-C/USB-A interface of computer or
Type-C interface of mobile phone. You will hear voice "connected". At
the same time, the Bluetooth indicator light of headset flashes slowly
and blue indicator light of Bluetooth transmitter is always on.
5. The headset and Bluetooth transmitter has been paired in factory
setting. When Bluetooth transmitter is plugged into the computer, the
headset will automatically connect to it after turned on.
Notes: if they can not be paired, please reconnect the headset to
Bluetooth transmitter following previous steps.
Publicidad
