DABBSSON DBS105S Manual De Usuario página 8

Sample 3B: Portable Power Station (Solar panel connection adapter+ MC4 6-in-1 cable)
1. Pull out the MC4 connectors on both solar panels;
2. Connect the connection adapter to the MC4 connectors on the solar panel;
3. Connect the other side of the connection adapter to the MC4 6-in-1 cable;
4. Connect the DC port (Anderson/XT60/DC6530/DC7909/DC5521/DC35135 port) of the
MC4 6-in-1 cable to the input port of the device.
Note: The maximum input depends on the device to be charged. lf a device has an input
limit of 200W, then the maximum input power is 200W regardless of whether a 200W or
400W solar panel is connected.
Sample 4: MPPT Solar Charge Controller
1. Pull out the MC4 connector on the solar panel;
2. Connect the MC4 port of the MPPT solar charge controller to the MC4 connector on the
solar panel;
3. Connect the DC port of the device to the MPPT solar charge controller.
MPPT
6