°
The attachment
lift switch
is used
to
3.
raise and lower the mower deck or other
attachments
mounted to your tractor, ign-
o
it,on must be on to operate
this switch°
.
Lower attachment
lift to lowest position.
CAUTION:
Continuing
to press the electric
lift switch after the mower deck has reached
the minimum or maximum position may result
in damage
to the electric
lift mechanism_
The electric
lift mechanism
is equipped
with
a thermal
protection
system,
if the system
overheats or fails to operate, allowthe
system
to cool before attempting
to operate
again.
.
ASSEMBLE
FRONT
GAUGE
WHEEL
(W) TO FRONT
OF MOWER
H. Front Mower Bracket
W, Front Gauge Wheel
X, Shoulder Bolt
Yo 1-1/40oD_ Washer
Z. 3/8-16 Locknut
TURN
STEERING
WHEEL
LEFT AND
POSITION
MOWER
Turn steering wheel to the left as far as it
will go and position mower on right side of
tractorwith
deflector shield (Q) to the right.
Front
Back
Transaxle
Q_ Deflector Shield
4. SLIDE
MOWER
UNDER
TRACTOR
"
Bring
belt forward
and check
belt for
proper routing in all mower pulley grooves.
NOTE:
Be sure
mower
side
suspension
arms (A) are pointing forward
before sliding
mower under tractor.
°
Slide
mower
under
tractor
until
it is
centered
under tractor.
A. Mower Side Suspension Arms
B. Retainer Spring
C, Rear Lift Link(S)
D, Right Side Rear Mower Bracket
E. Front Lift Link Assembly
E
Front Suspension Bracket
H_ Front Mower Bracket
L
Left Side Rear Mower Bracket
K, Belt Tension Rod
Lo Locking Bracket
M_ Engine Clutch Pulley
Q, Deflector Shield
So Anti-Sway Bar
W, Front Gauge Wheel
9