Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
1
Checking for leaks
□
Detach the pull out spray (B) from the pull out
spray hose (K). Hold the pull out spray hose (K)
firm to prevent it from retracting into the faucet
body (A).
□
Ensure the handle is in the closed position. Turn
the hot and cold water supplies on and check all
connections for leaks. If leaks are discovered,
check the connections to ensure they are tight
and properly secured.
□
Lift the handle to allow the water to run for
approximately one minute. This flushes away any
debris that could damage the internal parts.
□
Turn the water off and reattach the pull out spray
(B).
2
Removing the quick connector
CAUTION: Use caution when removing the quick
connector hose to prevent injuring your hands.
□
If it is necessary to remove the quick
connector (F), push the quick connector
housing up, hold the housing together
and pull down.
1
B
K
3
1
7
Please contact 1-855-HD-GLACIER for further assistance.
2
A
B
A
B
2
3
HOMEDEPOT.COM/GLACIERBAY
A
Publicidad
