OPERATION INSTRUCTION
Install Seat
Turn the seat lock on "open", take up the seat.
Make sure the hook on seat into the slot on body, then
turn the seat lock on "close", fix the sit. Pic2
Install Battery Connector
Link the battery connector and cable line connector
as pic 3 (Take note the positive and negative pole ).
Check and make sure the male & female ends are
fully matched.
Work Status
Kid sits on the car; put on the "On/Off" switch .
Place the switch to "Forward" or "Backward" and
push down on the Foot Pedal to move the car
forward / backward . Pic 5
Battery recharge
Take off the seat as pic 2. Split off the battery
connector as show, link the connector of battery and
charger, red light on, start the recharge. Stop recharge
after 8-12 hours, link the battery cable line. Put on
the seat. Pic 6