Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
AENO™ Garment Steamer is designed to remove creases in fabrics using
a jet of steam.
Models: AGS0002 (Plug Type E/F), AGS0002-UK (Plug Type G).
Technical Specifications
Power supply (input): 220–240 V (AC), 5.0 A (max.), 50/60 Hz. Power: 1,190.0 W
(max.). Water tank: non-removable, 110 ml. Water heating time: up to 40 s.
Steam flow rate: up to 24 g/min. Steam temperature: up to +150 °C. Continuous
operating time: up to 12 min. Steaming: vertical, horizontal. Control: mechanical.
Noise level (at a distance of up to 20 cm): ≥ 60 dB. Overheating protection.
Material: polypropylene. Color: Gray. Dimensions (L×W×H): 96×95×258 mm.
Power cable length: 1.8 m. Operating conditions: temperature +5...+40 °C, RH
≤ 93 % (non-condensing). Storage conditions: temperature −20...+70 °C, RH
≤ 93 % (non-condensing).
Scope of Supply (see Fig. A, B)
AENO™ Garment Steamer, measuring cup, protective glove, travel bag, Quick
Start Guide.
Device Elements and Accessories (see Fig. A, B)
1 – steamer head, 2 – handle, 3 – water tank plug, 4 – steam button with indicator,
5 – "On/Off" switch, 6 – power cord, 7 – measuring cup, 8 – protective glove,
9 – travel bag.
Limitations and Warnings
This device is not intended for use by children under the age of 14 or by persons
with reduced physical, mental or intellectual abilities unless they have
sufficient experience and knowledge of how to use the device and are
supervised by a person responsible for their safety. This device is intended for
If you have any questions or difficulties in using the AENO™ device, please e-
mail
support
aeno.com/service-and-warranty. The specialists will help you solve the
problem, and you will not have to waste time and effort visiting the store.
6
at
support@aeno.com
or chat
with
aeno.com/documents
us
online
at
Publicidad
