Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY:
• Remove the main unit and all accessories
from the box and check if there's anything
damaged.
• Be sure the Control Unit is unplugged.
• Place control unit on the floor or a level,
sturdy surface near your bathtub.
• Do not place unit where it can fall into the bathtub.
• Make sure the ON/OFF switch is at the position "O".
• Place the bath mat into bathtub and press it down. Use suction cups
to stick the bath mat firmly to the tub (it must not slide around).
• The suction cups will stick better if they are slightly wet.
• The connector on the bath mat is on the end where your feet
should be.
• Make sure there is a pleasant room temperature in the bathroom.
• Before using the product for the first time, we suggest to give your
bath tub a deep cleaning for the soft mat to adhere to the tub floor
better
• Connect the hose end with the valve and aroma clip to the main unit
and ensure it is locked by turning it counterclockwise.
• Connect the other hose end to the connector on the bath mat.
Connector
Mat Suction Cups
www.SereneLifeHome.com
7
Publicidad
