Descargar Imprimir esta página

XPower PL-700A Manual De Usuario página 6

Soplador de aire de perfil

Publicidad

Idiomas disponibles

Idiomas disponibles

Switch Plate
Indicator
Time Meter (For Model XL-760AM Only)
• The time meter shows the total running time from the first usage to the current
moment.
• When the machine turns on, the activity indicator will blink. The running
time starts to count. When the machine is off, the activity indicator will stay
illuminated.
• The value can't be reset. When the value exceeds 9999.9 hours, it will start over
from 0 again.
Additional Electrical Receptacle (Daisy Chain)
• Other appliances can be plugged in the additional electrical receptacles and work
whether the air mover is on or off. However, the total amperage must be lower than the
amperage instructed. Different models may have varying instructions.
• If the air mover or the plugged in appliance stops working, press the CIRCUIT RESET
BUTTON to reset the circuit.
For GFCI (Ground Fault Circuit Interrupter) protected additonal electrical receptacle:
• Once a ground fault occurs, the GFCI will immediately interrupt the power connection
to the additional electrical receptacle. Consult the Troubleshooting Guide.
• A ground fault is an inadvertent contact between an energized conductor (for example,
a human being) and ground or equipment frame.
WARNING: Risk of electric shock. You should test the GFCI before each use.
• Press the Test Button, the Power Indicator should go off. Then press GFCI Reset Button,
the Power Indicator should illuminate and Test Button should be reset to unpressed
position.
• If the Test Button does not react as stated above, consult the Troubleshooting Guide.
English - 6
Activity
HOURS
1/10

Publicidad

loading

Este manual también es adecuado para:

Xl-700aXl-730aXl-760am