foxbox ENERGY JUMP 12K Manual Del Usuario página 6

Charging and battery status scheme
To complete the charging of the starter, the following is
required. 3 y 4. Actual results may vary due to battery
conditions.
Powerbank function
Connect a USB-A or USB-C cable to the output ports and
connect it to the device.
Make sure the powerbank is turned on to start charging
the device.
The number of charges for other devices may vary
depending on usage and ENERGY JUMP capacity.
Flashlight function
Press and hold the LED ON/OFF button for 3 seconds
to turn on the ashlight. Press the button to switch
between the di erent ashlight modes.
1 LED ON
2 LED ON
3 LED ON
4 LED ON
ENGLISH ENGLISH
0 - 25%
25 - 50%
50 - 75%
75 - 100%
EN EN