HANNspree HF199H Guia De Inicio Rapido página 5

Installation and Removal
Install
Remove
INSTALLATION:
1. Align the monitor with the opening in the base.
2. Note that the longer section of the base points forward.
3. Snap the monitor into its base. A clear click sound will affirm that the base is
connected correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom
of the base and making sure that the clips are fully engaged in the base.
REMOVAL:
1. Put on the desk and press the hook that hold the monitor in place.
2. Gently press and hold the hook while pulling the base from the monitor
unit they are unattached.
HANNspree
3