Publicidad
Idiomas disponibles
Idiomas disponibles
In the music play mode, turn the knob to the left to go
to the previous track. Turn the knob right to skip to the
next track.
6. Moving between playback modes
Press the knob for 5 seconds to switch to FM broadcast
mode, then press it for another 5 seconds to switch
between Bluetooth, SD, and USB modes.
05. TECHNICAL SPECIFICATIONS
BT version: 5.0 (range up to 10m) | FM frequency range: 87.5-
108.0 MHz | Input: 12-24V | Outputs: charging - 1 x USB-A
port (QC 3.0) - 5V/4.5A, 9V/3A, 12V/2.5A, 1 x USB Type-C port
(PD30W) - 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A | Max
output - 5V/3A | Additional ports: 1 x USB-A (memory stick), 1
x micro SD memory card slot (max. 128GB) | Supported audio
formats: MP3/WMA/APE/WAV/FLAC | Operating modes: USB/
micro SD/BT | Overcurrent, overvoltage, short-circuit and
overheat protection | Dimensions: 75x56x36mm| Weight: 40g
| Maximum RF power emitted in the frequency range: 1.11
dBm | Frequency range: 2.402-2.480GHz
06. FAQ
1. Why doesn't the device switch on/pair automatically?
Some lighter models have a fixed electrical design. The
device cannot detect a change in voltage, so it cannot be
switched on. In this situation, simply remove the Xblitz
X450 and reinsert it into the cigarette lighter.
2. Why is the music/sound from the phone poorly
audible?
Turn up the Bluetooth volume on your phone or increase
the volume of your car radio when playing music/calls.
3. Why can't the device be switched on or does it make a
loud noise after being used for a while?
Check if the contact point of the device and the cigarette
lighter are dirty, which may cause a weak signal. Remove
11
Publicidad
