Mark SUPERLED 704 Manual Del Usuario página 5

To connect more than one unit in a chain, please, follow this picture. The output of the first unit must
provide to the next DMX input of the signal, this way it is possible to send the signal to all the devices in
the chain.
ADVANCED USE
CONTROL PANEL
SUPERLED 704 allows you to get configured in different ways thanks to its panel and selection buttons.
Press the MENU button once to enter MENU, use the UP
and DOWN buttons to move to the desired function
(according to the following chart), and press OK to confirm
your selection.
Use the UP & DOWN buttons to select the correct value.
(Press OK to confirm the setting).
4