CoolKiller CK 98Transparent Manual De Instrucciones

Ocultar thumbs

página de 6

/ 6
Marcadores

Idiomas disponibles

Enlaces rápidos

Descargar este manual

Website: www.coolkiller.com

Email: support@coolkiller.com

Instagram: https://www.instagram.com/coolkiller_keyboard/

Twitter: https://twitter.com/coolkillerkbd

Youtube: https://www.youtube.com/@coolkillerkeyboard

Brand owner: Dongguan Nexa Sound Innovation Technology Co.,Ltd

Manufacturer: Dieyun Innovation Technology Co., LTD., No. 20,

Sanjiang Industrial Zone, Hengli Town, Dongguan city

CK 98Transparent mechanical keyboard

Content list:

Double-ended key extractor×1

Mechanical keyboard ×1

Distribution shaft x 4

Distribution key cap x 1

Navigation spring data cable x 1

CK 98 Keyboard specification

Product Name: CK 98 Mechanical Keyboard

Number of keys: 97 keys

Light: RGB light effect

Connection port: USB Type-C

Mode: Three modes

PCB: Supports hot swap

Mute cotton: Two sheets of silicone mute cotton + shaft underpad

Product weight: 1300g

Product size: 390*145*44mm

Quick Start Guide

If you are a MAC user, flip the switch to switch to a MAC system

（After the conversion is successful, the MAC is displayed

in the lower left corner of the default screen）

If you are a WIN user, please flip the system conversion switch to WIN

（After the conversion is successful, the lower left corner

of the screen is WIN by default）

1 Power switch (built-in lithium batter y)

2 System transfer switch

1.Connect to Bluetooth

2.Connecting wire

Long press fn+5 to put the keyboard into wired mode

Long press the back 5 button and the white light will flash.

After the pairing is successful, the 5 keys will be on for 2

seconds and the backlight will be restoredBy default, the

lower right corner of the screen is

3.2.4G Mode

Short press fn+4 and long press fn+4

Set the keyboard to 2.4G pairing mode

Long press the back 4 button and the white light will flash.

After the pairing is successful, the 4 keys will be on for 2

seconds and the backlight will be restored(2.4G logo is at the

lower right corner of the screen in the default interface)

4.Changing lamp effect

fn+INS Adjust the lighting mode

fn+DEL Switching monochrome colors

fn+PGUP Turn the backlight off/on

5.Charging

Charging status The charging indicator animation is displayed in the

upper right corner of the default screen

*1,Lamp working current 250MA Sustainable time about 15 hours

(working all the time)

*2,Off working current 40MA Sustainable time about 80 hours

(always working)

*3,Standby current 0.5MA Standby time about 180 days

*4,Enter standby mode. Press any key to start the keyboard and enter working mode.

6.Back to the

1.Keyboard startup defaults to the last connected device

2.fn+1 (fn+2, fn+3) White slow flash connection

*To do this, the keyboard must have been paired with the device

7.Storage and use environment

1.Storage temperature: -20℃~+70℃

2.Operating temperature: -20℃~+60℃

3.Storage humidity: The relative humidity in the non-condense state is 30%-95%RH

8.Compatible system:

Supported operating system: ANDROID/ISO/Win XP/Win7/Win8/Win10/MAC

(default WIN system)

9.Custom driver

Domestic official website：

https://www.coolkiller.cn/

Scan the code to download the driver

Tip: The driver only supports customization in wired and wireless modes

（MAC operating system supports only wired customization）

10.Troubleshooting

1.Make sure the product's USB wireless receiver is properly plugged into

the USB port on your computer.

2.Ensure computer meets system requirements.

3.The product and the wireless receiver exceed the effective connection

distance. Please reduce the distance between the product and the receiver.

Fn Combined Function Keys (MAC)

Reset function

Fn Combined Function Keys (MAC)

Fn Combination key (WIN system)

Press and hold for 3s to

restore factor y Settings

Multimedia

Reduction in volume

Volume plus

mute

The last song

Next song

Pause play

stop

mail

Fn Combination key (WIN system)

HOME

END

Press fn+1/2/3 and then hold down fn+1/2/3

Put the keyboard into pairing mode,

The keyboard pairing name is CK98 5.0/CK98 3.0

Long press 1/2/3 button and the white light

will flash.After the match is successful, the

1/2/3 button will keep on for 2 seconds and

restore the backlight(By default, the Bluetooth

identifier is at the lower right corner of the screen.)

HOME

END

PAUSE

Backlight brightness +

Backlight brightness -

PAUSE

Backlight brightness +

Backlight brightness -

Overseas official website：

www.coolkiller.com

F10

F11

F12

Press Bluetooth 1 to connect back ,

Long press Bluetooth 1 to pair

Short press Bluetooth 2 to connect

back ,Long press Bluetooth 2 to pair

Tap Bluetooth 3 to connect back ,

Long press Bluetooth 3 to pair

Short press 2.4G to connect back ,

Long press 2.4G to pair

Wired mode

Main backlight effect switch

Backlight speed -

Backlight speed +

Quer ying the Display

Information

The home screen goes

to the Custom screen

Web page

The computer

calculator