Mark SET MAP 3008 Manual Del Usuario página 4

CONTROLS & FUNCTIONS
TROUBLESHOOTING
This short guide is meant to help and try to solve simple problems. If they continue and the device cannot
operate, please, don't try to repair it by yourself, return the device to your MARK PRO dealer.
If a problem occurs, carry out the following steps in sequence until the problem is solved.
1- If the device does not operate properly, unplug the device.
2- Check the fuse, power from the wall, all cables, etc.
3- If all the above appears to be OK, plug the unit in again.
4- If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5- Return the device to your MARK dealer.
1. XLR Combi Line Input connector.
2. XLR Line LINK Output.
3. Volume knov control.
4. PowerCon NAC3 AC Input.
5. PowerCon NAC3 AC Output.
6. Fuse housing, 220-240VAC T3.15AL 250V.
7. ON/OFF main switch.
3