AMS MU 401 Manual Del Usuario página 8

RECEIVER OPERATION
- Pull out the antenna (8), (9). Make them to be perpendicular with the receiver.
- Connect the external power supply to the receiver.
- Connect the audio cable. MIX OUT or BALANCEAD OUT according to the requirements of
the installation.
- Turn ON the power button (1). LCD display (3) will light. Receiver is in working status.
NOTE: Before turning on the receiver, turn the volume knob to the minimum volume and
adjust it when the receiver is working.
- Select function by adjusting the SET UP knob (6).
- Follow the instructions to SYNC the receiver and the handheld mic/bodypack.
- Long press the IR button in the receiver. The device starts to send signal and the icon
flashes.
- Turn on the handheld microphone/bodypack and put the IR window against the receiver
IR window. The signal icon disappears when IR is connected. The displays will show the
same frequency in both devices.