WolfPack KWAG1801 Manual De Instrucciones página 30

5.4. POWER TOOL USE AND CARE
• Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
• Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools
are potentially dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or jammed moving parts, breakages or
any other feature that might affect the operation of the power tool. If it is damaged, the
power tool must be repaired. Many accidents are caused by using poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
• Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5. SERVICE
• Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6. SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDER
• Do not use any attachments that are not specifically designated or recommended by
the manufacturer for this device. Just because you can attach an attachment to your
device does not guarantee that it can be safely used.
• The permissible rotational speed for the insertion tool must be at least as high as the
device's specified highest rotational speed. Attachments that rotate faster than the
permissible speed can shatter, creating flying shards.
• The outer diameter and thickness of the insertion tool must be in accordance with the
dimensions of your device. Insertion tools with the wrong dimensions cannot be
adequately shielded or controlled.
• Grinding discs, flanges, grinding plates and other attachments must fit the grinding
spindle of your device exactly. Insertion tools that do not fit exactly to the device's
grinding spindle rotate irregularly, vibrate very strongly, and can lead to a loss of
control.
30