Repare Your Photo Easy 150 Printer; Connect The Mains Supply - Sagem PHOTO EASY 150 Manual Del Usuario

3 P
REPARE YOUR
Remark: When installing your printer near a wall or some other object, keep an open space of at least 4 inches at the
back of the printer, to make sure the movement of the sheet of paper being printed is not obstructed.
Please refer to the safety instructions at the beginning of this user guide before making any
connections.
Insert one end of the mains lead into the corresponding socket of the power supply.
Connect the power supply to the printer as shown in the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Switch on the printer by pressing the " I " on the on/off switch located at the back of the
printer. The green light on the upper cover of the printer and segments on the LCD screen
blink during the initialisation phase.
Your printer has a Master USB, Mass storage SCSI connector (A). To obtain the list of
peripherals compatible with this USB port, please visit our site www.sagem.com.
PHOTO EASY 150
C
ONNECT THE MAINS SUPPLY
- 3 -
PRINTER
A