Descargar Imprimir esta página

Livoo SEP143 Manual De Instrucciones página 12

Nevera eléctrica caliente y fría

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Voltage: AC 220-240V 50-60Hz
Max power: 50 W
Mains cable 1.8 m and cigarette lighter cable 1.9 m included
Cooling power: 50 W
Heating power: 45 W
The cooler is designed to maintain products previously cooled or preheated at a cold or hot
temperature. For optimal efficiency:
• Do not overload the device.
• Close and seal the packaging tightly to prevent any overflow or leakage.
• Avoid using the device in extreme conditions.
• Keep the device closed for better cold retention.
• Turn the handle to the back of the product to lock the device's opening.
Use of the device
Before plugging in the cooler, make sure the switch is in the off position (OFF).
Car socket connection: Ensure that you start the car engine before plugging in the device to avoid
overvoltage, which could lead to overheating and a potential fire risk. Plug the cigarette lighter adapter
end of the cable into the vehicle's cigarette lighter socket and the other end of the cable into the 12V DC
socket of your cooler.
Set the switch to COLD or HOT according to your preference and let the cooler run empty (with the lid
closed) for about thirty minutes to reach the desired temperature. Then, place your food or beverages
inside the cooler.
Wall socket connection: Plug the power cable into your wall outlet and the other end into the AC input of
your cooler, then proceed as described above.
Cleaning and maintenance
Disconnect the power cable or cigarette lighter cable before any cleaning and maintenance operation
or when the device is left unattended. Do not clean your hot/cold cooler with abrasive products or
sponges. Do not immerse the cooler in water, simply wipe it with a damp cloth to remove dirt. When not
using your cooler, store it in a dry, dust-free place.
Correct disposal of the unit (Electrical and Electronic Equipment).
(Applicable in the European Union and the rest of Europe that have adopted separate collection
systems countries). The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed of in the normal
household waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain and reduce the impact on human health and
the environment. The symbol of the crossed out dustbin is marked on all products to remind the
obligations of separate collection. Consumers should contact their local authority or retailer for
information concerning the correct disposal of their product.
Non contractual illustration
Product information is subject to change without prior notice.
----------------------------------------------------------------------------------------------
Gracias por haber elegido un producto Livoo!
www.livoo.fr
ES

Publicidad

loading

Productos relacionados para Livoo SEP143