Smoothskin Pure adapt Guia Del Usuario página 19

7 . H O W T O U S E S M O O T H S K I N P U R E
A D A P T
WARNING: Follow each step in the treatment process ensuring you complete all aspects of
each step before progressing to the next.
S T E P 1 : P R E PA R E T H E A R E A T O B E T R E AT E D
Remove all visible hair by shaving. Make sure there is no hair remaining above the surface
of the skin as this may cause injury. This also prevents debris from covering the front of
your device.
Cleanse the treatment area and pat dry. DON'T use any gels or creams with this device!
S T E P 2 : D O A PAT C H T E S T
Before your first treatment on each new body area, we RECOMMEND you test your skin in
that area for a reaction to SmoothSkin Pure Adapt.
The patch test area should be approximately 3cm x 2cm in size (equivalent to 2 flashes
applied to the skin side by side). Follow Step 3 to treat the area.
Wait 24 hours following the patch test, to ensure your skin is suitable for treatment and
there is no adverse reaction to the light energy. If there is no reaction after 24 hours, you
may treat the area around the patch test. The 'patch tested area' should NOT be re-treated
for at least 1 week.
19