Publicidad
Idiomas disponibles
Idiomas disponibles
EN
When in hertzs editing mode, the lightning bolts will turn yellow, and the "VOLTS" text will
be replaced by the numerical value in hertzs.
During the motor cycle editing process, the hertzs value will flash. The numerical
adjustment is done by increasing or decreasing it with the
/
keys.
After 3 seconds without pressing any button, it will automatically exit the editing mode,
memorising the selected value.
If you want to return the hertzs value to factory settings, press the key combination
(
&
) - (B).
Caution: Upon exiting editing mode, the hertzs value will remain unchanged, even if the
voltage value varies. This could cause erratic motor operation. In this case, it is
recommended to return to editing mode and reset to the factory settings (
&
).
17
Publicidad
