iOttie iTap 3 Manual Del Usuario página 5

02 Installation
Attaching the Mount
1. Connect the cradle to the vent mount and
tighten the cradle knob.
2. Rotate the dial counterclockwise to extend
the hook. If installing on a vertical air vent,
rotate the hook so it is facing sideways.
8 EN
3. Insert the hook onto the air vent and secure
the mount in place by rotating the dial
clockwise until the mount sits flush against
the vent.
4. To change the viewing angle, loosen the
cradle knob and adjust the mount to your
desired position. Tighten to secure it in place.
Mount is designed to be used only with FLAT air vent
blades.
9