Publicidad
5. Place the plate of the top pole (3)
on the back of the backboard (10)
and then place the plate of the hoop
(7) into the front slot on the back-
board.
Secure all three into place using the
4 short bolts (5). Tighten to secure.
NOTE: Ensure the backboard is
7
between the two metal parts to help
3
with stability.
6.Take the net (8) and hook over the loops. Now take the Top Pole (3)assembly and
slot onto the Centre pole (2), align the holes on the top pole with those on the centre
pole and insert the tension knobs (11). Tighten to secure into place.
3
7
Publicidad
