cecotec ENERGYSILENCE 500 DESKCHILL SMART Manual De Instrucciones página 34

ENGLISH
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Air cooler
- Type C charging cable
- Instruction manual
- Funnel
3. OPERATION
Filling the water tank
Fig. 3
1. Remove the cap from the water tank.
2. The funnel is folded for easy transport. Unfold it.
3. Place the funnel in the filling hole of the water tank.
4. Add water through the funnel.
5. Remove the funnel.
6. Close the cap.
NOTE:
- Do not tilt or shake the air cooler to prevent water spillage.
- When filling the tank, make sure that the water level does not exceed the "MAX" mark. You
can check this by looking at the water level indicator on the side of the water tank.
1. Connect the small end of the Type-C charging cable to the port on the right side of the air
cooler and the other end to a power source.
2. Press the power icon
3. When the air cooler is switched on, it will start at speed F3 (high). Press the speed icon
to select the desired speed.
- If you press the icon once, the air cooler will operate at F1 (low) speed.
- If you press it a second time, the air cooler will operate at speed F2 (medium) speed.
- If you press it a third time, the air cooler will operate at F3 (high) speed.
4. Pressing the power icon
except humidification.
5. Press the humidification function icon
- If 00 is selected, the dehumidification function will be deactivated.
- If you press the icon once, the humidification level will be 01 (low).
- If you press it a second time, the humidification level will be 02 (high).
- If you press it a third time, the humidification level will be 00 (off).
34
ENERGYSILENCE 500 DESKCHILL SMART
to switch on the cooler.
when the air cooler is in operation will deactivate all functions
and select the desired humidification level: