Bosch UniversalHedgeCut 18V-55 Manual Original página 14

14 | English
Cordless hedge trimmer
Recommended ambient temperat-
ure during charging
Permitted ambient temperature
during operation B) and storage
Battery type
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to EN 62841-4-2:2019
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-2:2019
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Switching on
For Your Safety
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
The blades continue to move for a fraction of a second
u
after the hedge trimmer is switched off.
Do not touch the moving blades.
u
Inserting/removing the battery (see figure B)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
F 016 L94 155 | (05.05.2021)
UniversalHedgeCut 18V-50
°C
°C -20... +50
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah,
4.0 Ah, 5.0 Ah, 6.0 Ah
3 600 H49 K..
dB(A)
dB(A)
dB
m/s 2
m/s 2
Insert the charged battery (10). Make sure that the battery
is fully fitted. A click can be heard when it engages.
To remove the battery (10) from the machine, press the bat-
tery unlocking button (9) and pull the battery out.
Battery charge-control indicator (see figure C)
The battery charge-control indicator informs you of the re-
maining battery capacity when the On/Off switch is pressed.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Slow flashing 1 x green
The three LEDs of the battery charge-control indicator flash
rapidly when the battery temperature is not within the oper-
ating range of -20 to +65 °C and/or when the overload pro-
tection has responded.
Operation
Switching On and Off (see figures D − E)
Once battery is attached and you hear the "click" (see figure
B), to operate the product, pull front trigger (4) and rear
trigger (2) together.
To switch off the product, either release rear trigger (2) or
front trigger (4) or both together.
UniversalHedgeCut 18V-55
0... +35
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah,
4.0 Ah, 5.0 Ah, 6.0 Ah
3 600 H49 J..
74
94
2
< 2.5
1.5
Capacity
≥ 75 %
40 − 75 %
15 − 40 %
0 − 15 %
Bosch Power Tools
0... +35
-20... +50
74
94
2
< 2.5
1.5