Kenmore 116.34725 Manual Del Propietário página 19

TO CLEAN AGITATOR
Note" In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is changed.
The agitator must be cleaned according to
the following schedule:
Vacuum Use
HEAVY
(used daily)
MODERATE
(used 2-3 times/week)
Clean Agitator
every week
every month
UGHT
(used 1 time/week)
every 2months
Remove any dirt or debris in the belt path
area or in the agitator area,
End
t
Washer
Exploded View - Agitator
Assembly
Agitator Unit
End
End Cap
Carefully remove
the brush end
caps and remove
any string or
debris located on
the agitator
assembly, end
caps or agitator
shaft.
Note: Replace the end caps. See the
exploded view for correct assembly.
TO REPLACE BELT
Make sure that the carpet]bare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft.
Carpet/Bare Floor
Belt New Selector Shaft
Pulley Belt
BELT ROUTING
Correct Routing of Belt
(Selector in Carpet Positlon)
Agitator Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
'\ Carpet/Bare
,Roor Pedal
Agitator Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector In Bare Floor Posftlon)
Agitator Belt Carpet/Bare Floor
Selector Shaft
19