Publicidad
Enlaces rápidos
Publicidad
Resumen de contenidos para ESB AUDIO NOVEMILA 9000 Serie
- Página 1 9000 High-End Speaker Series Quick Installation Manual...
- Página 2 9000 High-End Speaker Series...
- Página 3 General Instructions Istruzioni Generali Allgemeine Anweisungen Instructions Générales Instrucciones Generales 常规安装指引 The installation of the product must be done L'installazione del prodotto deve essere effet- Die Installation des Produkts muss von profes- L'installation du produit doit être effectuée par La instalación del producto debe ser realizada 产品的安装必须由熟练的技术人员完成.
- Página 4 Installation 9.1T-25 Ø46 Basic Mounting Part List 1 2 x 9.1T-25 2 2 x Grille 3 2 x Cup 4 2 x Spring 5 2 x Honda Adaptor 6 2 x VW 1 Adaptor 7 2 x VW 2 Adaptor 8 2 x BMW 1 Adaptor 9 2 x AUDI 1 Adaptator 10 2 x AUDI 2 Adaptator...
- Página 5 Installation 9.1T-28 Hole Marking Basic Mounting Part List Ø77 Ø46 1 2 x 9.1T-28 2 2 x Fixing Ring 3 2 x Housing 4 2 x Back Cover 5 2 x Finishing Ring 6 2 x Damper Housing Mounting 7 1 x Ring Tool 8 2 x Support 9 5 x M3x5 Screw 10 5 x M3x5 Screw...
- Página 6 Installation 9.UMA Hole Marking Basic Mounting Part List 1 2 x 9.UMA 2 2 x Foam Gasket 3 8 x Ø3x14 Screw 4 2 x 2.5 mm Hallen L-Key 5 2 x 2 mm Hallen L-Key 6 Butyl Rubber Sealant Grille mounting.
- Página 7 Installation 9.3M How to center the Grille Ring Part List 1 2 x 9.3M 2 2 x Grille Ring 3 2 x Grille 4 2 x Foam Gasket 5 8 x Ø3x5 Screw Hole Marking 6 2 x 2.5 mm Hallen L-Key 7 7 x 255 mm PVC Midrange + Grille Mounting Midrange without...
- Página 8 Installation 9.4M Grille mounting. Use small Hole Marking pieces of butylic rubber (8) inside vertical edge of ring (2) Peel min 5 Part List max 10mm 1 2 x 9.4M 2 2 x Grille Ring 3 2 x Grille 4 2 x Foam Gasket 5 8 x Ø3x16 Screw 6 2 x 1.5 mm Hallen L-Key 7 2 x 2.5 mm Hallen L-Key...
- Página 9 Installation 9.6W Hole Marking Grille removal. Insert Peel min 5 and twist the tool, then max 10mm pull upwards Part List 1 2 x 9.6W 2 2 x Finishing Ring 3 2 x Grille 4 2 x Grille Ring 5 2 x Foam Gasket 6 8 x Ø3.5x20 Screw 7 2 x 2 mm Hallen L-Key 8 2 x 3 mm Hallen L-Key...
- Página 10 Technical Specifications 9.UMA Speaker Type: Component Tweeter Nominal Diameter: 1”/25 mm Nominal Impedance (Znom): 4 Ohms Continuous Power Handling: 100 W Peak Power Handling: 200 W Rec. Amplifier Power: 40 - 150W (RMS) Parameters Voice Coil Resistance (Re): 3.8 Ohms Free Air Resonance (Fs): 1.25 KHz Sensitivity: 91.5 dB @ 2.83v/1m 88.5 dB @ 1W/1m...
- Página 11 Designed and Engineered in Italy by ESB Distributed in Europe / Distribuito in Europa da: ARPA of Europe srl - Via Isonzo snc, 04100 Latina, Italia esbcar.com Manual v.1.1 - May 10, 2024...