Publicidad
Idiomas disponibles
Idiomas disponibles
Bulldog
BD1100
Opening your life
Code:
NOTE:
1) You must follow the operating instructions mentioned above, any malfunction is not allowed during adjustments. If your device responds
to your requested function correctly, you have successfully con gured the function, otherwise repeat the above setup instruction until your
device responds to the requested function.
2) If the door cannot be moved, please check if the door is obstructed or the door is too heavy.
3) Remote control: Each push of the button makes the door able to: close, stop, open or stop its cycle (Single channel mode). Or the rst
button is to open, the second button to close, and the third button is to stop (Multi-channel mode).
4) Three-Button Mode, External Switch Button (not included). Press the "OPEN" button to open the door. Press "STOP" to make the door stop.
Press "CLOSE" for the door to close.
5) Single button mode, external switch / keyboard button (not included). With each push of the button, the door closes, stops, opens or stops
the cycle.
Automatic closing function:
1) This feature can be selected to make the door stay open for a few seconds before it closes automatically. The automatic closing can be
adjusted between 1, 10 and 30 seconds.
2) Safety device (Infrared photocell): If the infrared beam is interrupted during closing, the door will turn back and open immediately. This
feature will not work if the door is in the fully open and closed position during opening.
3) Opening priority: The door will reopen if the "OPEN" button of the external switch button is pressed during closing.
4) Limit switch: the switch is used to precisely stop the door in the open and close positions. If the door stops in the open position when the
switch limit is reached, the door will not move if you press the "OPEN" button. If the door stops in the closed position when the switch limit is
reached, the door will not move if the "CLOSE" button is pressed.
5) The device is installed with a thermal protector, the thermal protector will turn o the motor automatically in case the temperature is
higher than 120 ° C and it will start the motor automatically when the temperature is less than 85 ° C ± 5 ° C.
Maintenance
Check whether the gate operates normally every month.
For the sake of safety, each gate is suggested to be equipped with infrared protector, and regular inspection is required.
Before installation and operation of the gate opener, please read all instructions carefully.
Our company reverses the right to change the instruction without prior notice.
www.accessmatic.com
Opening your life
13
Publicidad
