IXROAD MD300 Manual Del Usuario página 6

navigation function.
There are two ways to view the riding route displayed on the map.
Play the riding route in the app called "RoadCam":
Step 1: Download the video to your phone in the APP.
Step 2: Find "Album" at the bottom of the APP homepage and click to enter.
Step 3: Play the video and click the "GPS" option below the video, you will be able to see the riding
route.
Play the riding route in a PC player named "GXPlayer":
Step 1: Install a video player named "GXPlayer" on your PC.
Step 2: Take out the Micro SD card from the control unit.
Step 3: Insert the Micro SD card into the PC and read it.
Step 4: Open GXPlayer and play the video in Micro SD, then you will be able to see the riding route.
You can also download other players that can play GPS routes, which have the same effect as
GXPlayer.
7, WiFi Connection
The control unit can be connected to smartphone or tablet via WIFI, the connection steps are as follows:
(1) Download the "RoadCam", then install this APP on your smartphone or tablet.
(For Android system, the app can be searched and downloaded at the Google Play; for iOS system, the
app can be searched and downloaded at the Apple APP Store).
(2) After turning on the control unit, activate the WiFi function.
(3) Once the WiFi function is activated, the screen of the control unit will prompt the SSID and PWS for
about 10 seconds. SSID indicates the hotspot name of WiFi, and PWS indicates the initial password.
(4) Open the WiFi list of the smartphone or tablet, search for and connect to the WiFi hotspot prompted
by the control unit.
(5) After the connection is successful, open "RoadCam" and click the camera icon on the initial page to
enter the image interface.
(6) You can view photos, videos, and riding routes through the app. You can also download videos or
photos directly to your smartphone or tablet.
8, Handlebar Bracket
4