Publicidad
Smart home devices
TECHNICAL SPECIFICATIONS:
Power consumption: AC 120 - 240 50 Hz / 60 Hz
Maximum current: 16 A (3680W)
Protocol: Wi-Fi
Frequency: 2400MHz - 2483.5MHz
Maximum RF output power: WiFi: 20dBm
Mains standby power supply (Pnet): 0.5W
Wireless range: 30 m direct visibility, 10 m in built-up area
Operating temperature: -20°C to 60°C
Ope rating humidity: 20% - 80%.
Degree of protection: IP68
Dimensions: 135 mm x 62 x 40 mm
Weight: 120g
DOWNLOAD AND REGISTRATION
Scan QR code and download the Immax NEO PRO
application
Or find and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO app and click on "Register-Wat" to create your
your own account.
- When you are done registering, log in with your account.
PAIRING THE PRODUCT TO THE APPLICATION
Preparation: connect the Smart Switch to the power supply according to the infor-
mation on the product body and open the Immax NEO PRO app. Make sure you
are connected to the same WiFi network that the product will be connected to.
Perform a device reset - press the reset button on the product for more than
5 seconds. The LED light behind the device will start flashing rapidly.
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small parts,
which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can
damage skin, clothing or area where the battery is stored. To avoid the risk of
injury, do not allow any substance from the battery to come into contact with the
eyes or skin. Every battery may burst or even explode if exposed to fire or other
forms of excessive heat. Take care when handling the batteries. To reduce the
risk of injury from mishandling the batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer's instructions for proper battery handling
and disposal.
CAUTION: The product and batteries should be disposed of at a recycling
centre. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU
www.immaxneo.cz | www.immaxneo.com
Vyrobeno v P.R.C.
Immax NEO LITE Smart outdoor switch 16A, IP68, WiFi
In Immax NEO PRO, click on the Room tab and then the "+" button to add the
device. In the Immax NEO tab, select the product. Enter your WiFi network
access data and confirm. The product will then be paired and added to the
Immax NEO PRO.
Pair button
installation site according to valid regulations. The installation must only be carried
out by an individual with the appropriate certification in the field of electronics.
During installation or when a fault is detected, the power cable must always be
disconnected from the socket (in the case of direct connection, the relevant circuit
breaker must be switched off). Improper installation can damage the product and
cause injury.
CAUTION: Do not disassemble the product, electric shock may occur. CAUTION:
Use only the original power adapter provided with the product. Do not operate the
device if the power cord shows signs of damage. CAUTION: Follow the
instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.eu
Publicidad
