PNI Safe House HS540 Manual Del Usuario página 3

Technical specifications
Supply voltage
Valve pressure
Valve diameter
Valve closing/opening time
Torque
Wi-Fi frequency
Wi-Fi transmission power
Installation guide
• Install the bracket on the smart valve ear. Attention: the screw must not
be tightened completely.
• Fix the bracket on the water or gas pipe.
• Adjust the position of the smart valve so that the axis of the valve is in line
with the axis of the handle of the water or gas faucet.
• Tighten the screw at both ends of the mounting bracket.
• After installing the valve, manually pull the valve release ring.
• Place the smart valve handle on the faucet handle.
• Check if the valve handle is perfectly overlapped on the faucet handle.
• Tighten the 2 screws of the smart valve handle.
• Connect the 12V / 1A power adapter.
User manual
230 VAC - 12V/1A (power adapter
included)
1.6 MPa
1.2 inch
5-10 s
30-60 kgf.cm
2.4GHz
100mW
3 English