Descargar Imprimir esta página

Kukirin G2 Master Guia De Inicio Rapido página 4

Ocultar thumbs Ver también para G2 Master:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
EN
4.Argument list
Product name
Folded size
Size
Unfolded size
Maximum speed
Medium-speed endurance
Maximum slope
Tires
Parameters
Shock-absorbing
Waterproof
Brakes
Display device
Lighting
Input voltage
Voltage/Capacity
Battery data
Charging time
Maximum load
Maximum load
Weight
Net weight
5.Packing list
1.User's manual*1
2.Tire pump*1
Please carefully check for any loss or damage. If so, please contact us promptly.
03
1260*595*595mm
1260*595*1315mm
≤ 25 km/h
≤ 70 km
≤ 20°
10 inch off-road tires
Front and rear hydraulic shock absorption
IP54
Front and rear disc brakes
Speed, mileage, battery level, front light, etc.
LED
100~240V/50~60Hz
52V/20.8Ah
58.8V/2A charger, charging for approximately 10 hours.
120 kg
About 33 kg
3.Tool kit and
4.Charger*1
5.Handle lock block * 1
screw accessories
6.Assembly guidelines
Unpacking and assembly
1.Turn the knob to secure
2.Put the handle tube into
the folding switch.
the fixed seat.
Fold and unfold
1.Drop the hook and pull
2.Pull up the upright pole.
the standing bar.
7.Maintenance
Lubricating oil: Every six months, a small amount of white lubricating grease or lubricant needs to be
added to the folded area for maintenance.The scooter should be inspected every three months to see if any
screws are loose. If any are loose, please tighten them.
Battery: When the scooter is charging or not in use, please turn off the power. When it is not in use for a
long time, the electric scooter should be placed in a safe location and charged at least once every 3 months.
Storage: Please do not leave the scooter in scorching sun or other severely humid areas for a long time.
Please keep the scooter clean.
EN
3.Tighten the screws and
check the power switch.
3.Turn the knob to lock the
folding clip.
04

Publicidad

loading

Productos relacionados para Kukirin G2 Master

Este manual también es adecuado para:

G2 max