Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 11
3. Loosen the brake by pulling it towards the front handle.
Using a screwdriver, run the chain along the guide to
check that it moves smoothly.
Chain Lubricant
IMPORTANT! Only use a good quality bar and chain oil
designed specifically for use with chain saws to ensure optimal
lubrication of the cutting parts. Do not use oil containing
impurities to avoid clogging the tank filter and permanently
damaging the oiler.
IMPORTANT! The chain lubricating oil is bio-degradable. The
use of mineral oil or engine oil can have a serious impact on
the environment. It is essential that you use good quality oil to
lubricate the cutting parts effectively. Used or poor quality oil
does not guarantee good lubrication and reduces the lifespan
of the chain and bar.
IMPORTANT! Before each machine use, the oil level should
be checked and topped up to 1 cm from the rim of the
filler. To fill the oil tank, remove the oil tank cap and add the
recommended bar and chain oil. The oil level must not drop
below the "L" level mark, as indicated on the oil tank (Fig. 12).
Fig. 12
Battery Pack Operation
The equipment is powered by a lithium-ion battery (sold
separately). The battery pack is completely closed and
maintenance free.
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this chain saw, you will need to additionally
purchase either the iON100V-2.5AMP or iON100V-5AMP
lithium-ion battery and the 100 V quick charger (model
iON100V-RCH). Battery and charger options available at
snowjoe.com.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator
(Fig. 13):
Fig. 13
• All 4 level monitoring LEDs are lit: Battery charge level
is high.
• 3 level monitoring LEDs are lit: Battery charge level is
Oil tank cap
decreasing.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
Oil level
• 1 level monitoring LED is lit: Battery is flat. Stop work
window
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
11
TOOL ONLY
Press
Charge level indicator push button
Publicidad
