Publicidad
Idiomas disponibles
Idiomas disponibles
unpacking
OPI speaker follows a strict quality control regimen and all
factory-sealed products leave the facility in perfect condition. If
there are any damages visible or concealed they have occurred
in handling and must be reported immediately to your authori-
zed dealer.
Carefully remove the speaker from the box, take caution as the
size often deceives the actual weight. Save all custom cartons
speaker position
OPI speakers are perfect for patios, decks, swimming pool dec-
ks, porches or any other place where exposure to the elements
makes conventional loudspeaker usage unsuitable.
To achieve the best performance from your speakers, place the
pair on the same wall facing the listening area and space them
six to fifteen feet apart.
installation
Each speaker is supplied with a weather-resistant "C" type
mounting bracket. This bracket attach to the speaker with the
supplied knobs that thread ont the top and bottom studs protru-
ding from the cabinet. This allows the speaker to be angeld to
the left or right when mounted verically, or up and down when
mounted horizontally.
Affix the speaker to the bracket with the supplied knobs. Be sure
to leave enough clearance between the end of the bracket and
any adjacent wall or ceiling for installation of the knobs, point
the speaker toward the listening area.
If you are not sure about the material or strengh of the wall or
ceiling, please contact your authorized dealer or installer to
avoid any damage.
and packaging foams for future use. They are rather expensive
and may come in handy for future upgrades.
Pack contents:
• 1 speaker
• 1 mounting bracket
• 1 user manual
For a higher quality stereo image, angle dowm, or toe in, the
speakers toward the primary listening area. This is especially
important in installations that place the speakers well above
ear level. You can improve the bass rendering by placing the
speakers in a corner or near a wall.
After determing the desired location and orientation of your
speakers, remove the bracket from the loudspeaker and use it
as a template to mark the location of the mounting holes. Check
the alignment of the holes with a torpedo level before drilling
the pilot hole.
WARNING Choose dowels according to your wall or ceiling
material (wood, concrete...) that can support the weight of the
speaker. We highly recommend the use of a torpedo level in
order to check the good alignment (vertical or horizontal) of the
speaker.
- 5 -
User Manual
Publicidad
