MICROWAVE WITH GRILL
Operating Instructions
MWD8820G
OPERATION
Pre-set Function
Set the clock first . (Consult the instruction of clock setting.)
•
Input the cooking program. Two stages can be set at most. Defrosting should not be set in preset function.
•
Example: if you want to cook with 80% microwave power for 7 minutes.
a.Press
Micro
wave
/Grill Combi.
b.Turn the knob to choose 80% microwave power till P80 display;
c.Press
Start/+30Sec./Confirm
d.Turn the knob to adjust the cooking time of 7 minutes;
After the above steps,please do not press
Clock/ Pre-Set
.The hour figures flash;
•
Press
Turn the knob to adjust the hour figures,the input time should be within 0--23.
•
Press
Clock/ Pre-Set
.The minute figures flash;
•
Turn the knob to adjust the minute figures,the input time should be within 0--59.
•
Start/+30Sec./Confirm
Press
•
Note: clock must be set first. Otherwise,pre-set function will not work.
Inquiring Function
In cooking states of microwave,grill and combination,
•
In pre-set state,press
Clock/ Pre-Set
•
The pre-set time will flash for 2-3 seconds, then the oven will turn back to the clock display.
During cooking state,press
Clock/ Pre-Set
•
once;
to confirm;
Start/+30Sec./Confirm .
to finish setting,buzzer will ring twice when the time arrives,then cooking will start automatically.
press
Micro
wave
to inquire the time for delay start cooking.
to check the current time.It will be displayed for 2-3 seconds.
Then
do as following:
the current power will be displayed for 2-3 seconds.
/Grill Combi.
GB-10