÷
÷
PBayback
procedure
Press TV!DVO to select
the DVD mode.
Press OPEN/CLOSE on
the unit or the remote
control.
The disc tray will open.
i
i
i
i
_i
i
ii
2
Place a disc onto the
tray. Position
it with the
printed
label side up,
align it with the guides,
and place it in its proper
position
NOTES:
If a non-compatible
disc is loaded,
"Incorrect
Disc"_ "Region
Code Error" or
"Parental
Error" will appear
on the TV
screen according
to the type of loaded
disc. tf these appear,
check your disc
again (see pages
25 and 38).
Some discs may take a minute or so to
start playback
• A"Prohibition"
symbol
_ may appear
at
the upper left of the screen.
This symbol
means either the feature
you
tried is not available
on the disc, or the
unit can not access
the feature
at this
time. This does not indicate
a problem
with the unit.
When you set a singte-faced
disc label
downwards
(ie. the wrong way up) and
press
PLAY or OPEN/CLOSE
on the
unit, "Reading"
will appear
on the display
and then "incorrect
Disc" will be dis played.
Some playback
operations
of DVDs may
be intentionally
fixed by software
producers.
Since this unit plays DVDs
according
to the disc contents
the
software
producers
designed,
some
playback
features
may not be
available.
Also refer to the instructions
supplied
with the DVDs.
28
3
Press PLAY or OPEN/
CLOSE
The disc tray closes
automatically.
On the screen, A changes
to Reading"
and then
playback will commence
, Amenu
screen may
appear on the TV screen,
if the disc has a menu
feature
In this case,
press _,,V
4,
• or
ENTER to operate a
menu feature
Press STOP to end playback.
The unit memorizes
the stopped
point, depending
on
the disc. "_"
appears on the screen for approx. 4 seconds.
Press PLAY to resume
playback
(from the scene point).
If you press STOP again ("m"
appears
on the screen)
or unload the disc, the unit will clear the stopped
point.
Then press OPEN!CLOSE.
The disc tray opens.
Remove
the disc and press POWER.
The disc tray closes automatically
and unit turns off.
÷
5P20521A
[E] P27-32
÷
5/12/04.
2:42 PM