Publicidad
Idiomas disponibles
Idiomas disponibles
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
OPERATION
Connect the device to the mains with the power-plug. Make sure that the outlet is in a dry area. After you
connected the device to the mains, the Landscape Spot starts running.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
TECHNICAL SPECIFICATIONS
Device:
Power supply:
Power consumption:
Protection grade:
Number of LEDs:
Maximum ambient temperature T
Maximum housing temperature T
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 09.08.2007 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
B
50498640 - 50498647
230 V AC, 50 Hz ~
5 W
IP 65
3
45° C
60° C
98 x 98 x 326 mm
0.8 kg
11/20
50498648, 50498649
230 V AC, 50 Hz ~
4 W
IP 65
3
45° C
60° C
98 x 98 x 326 mm
0.8 kg
00024330.DOC – Version 1.1
Publicidad
