Publicidad
Idiomas disponibles
Idiomas disponibles
20
www.raider.bg
cutting disc to reach its full spin speed. Otherwise, the disc may clog, bounce off the workpiece or
cause a kickback.
8.5. Ensure that the large parts are securely fastened in an appropriate way to reduce the risk of
kickback resulting from a wedge-shaped cutting disc. During cutting, large details can bend under the
force of their own weight. The workpiece should be supported on both sides, both close to the cutting
line and at the other end.
8.6. Be especially careful when slitting channels into walls or other areas that may hide surprises.
The cutting disc may cause the machine to come into contact with gas or water pipes, power lines or
other objects.
9. Special instructions for safe sanding abrasive work.
9.1. Do not use too large sandpaper sheets, observe the manufacturer's sandpaper guidelines.
9.2. Abrasive paper that runs out of the disk may cause injuries as well as blocking and rupturing of
the sandpaper or a recoil.
10. Special instructions for safe cleaning with wire brushes.
10.1. Do not forget that even in normal operation, the wire brush drops staples. Do not overload the
wire brush by pressing it too hard. The wire brushes that run off the wire brush can easily penetrate your
clothes and / or skin.
10.2. Make sure that the wire brush does not touch the safety guard.
Disk and cup-shaped wire brushes can increase their diameter due to the force of compression and
centrifugal forces.
11. Additional instructions for safe operation.
Work with safety glasses.
11.1. Use appropriate utensils to locate any hidden subfloor piping, or contact your local supply company.
Contact with live wires may cause fire and electric shock. Damage to a gas pipeline may lead to an
explosion. Damage to the water mains results in major material damage and may cause electric shock.
11.2. When handling stone materials, work with an external dust extraction system. The use of a dust
collection system limits the health damage caused by the dust.
11.3. While working, hold the angle grinder firmly with both hands and hold a firm body position. With both
hands, the angle grinder is safer.
11.4. Provide the machined detail. A detail gripped with appropriate fittings or brackets is locked more firmly
and securely than if you hold it by hand.
11.5. Keep your workplace clean. Mixtures of different materials are particularly dangerous. Fine castings
of light metals can self-ignite or explode.
11.6. Do not use any accessories that are not recommended by the manufacturer specifically for this power
tool. The fact that you can attach a particular tool or tool to the machine does not guarantee safe operation.
11.7. Never place your hands near rotating work tools.
11.8. Regularly clean the ventilation holes of your cordless machine.
11.9. Use only the recommended battery and charger.
11.10. To clean the cordless machine, use soft and dry cloth. Never use any solvent or alcohol.
12. Functional description and purpose of the cordless angle grinder.
The cordless angle grinder is a power tool powered by a battery. It is driven by a single-phase collector
motor whose torque is transmitted to the output shaft by means of a crown and a pinion. The cordless
angle grinder is designed for cutting and grinding materials such as stone and metal. The angle grinder
is designed for cutting, rough grinding and wire brushing on metal and stone surfaces without the use of
water. With special sanding accessories, the angle grinder can also be used for abrasive sanding. Power
tools with cordless, cordless power supply are especially suitable for work related to interior decoration,
room adaptation, and more.
When working on metal and stone, the grinding wheel should only be used when the safety guard is
installed!
It is not allowed to use the power tool for activities other than its intended purpose!
13. Noise and vibration data.
The noise and vibration values have been measured in accordance with EN 60745:
Sound pressure level: LpA = 85,06 dB (A) K = 3 dB (A)
Publicidad
