Epson L3560 Manual De Instrucciones página 10

Important Safety Instructions
Before using your Epson
■
Be sure to follow all warnings and instructions marked on the product.
■
Use only the type of power source indicated on the product's label.
■
Make sure the AC power cord meets the relevant local safety standards.
■
Use only the power cord that comes with the product. Use of another cord may cause fires or shock.
Do not use the cord with any other equipment.
■
Place the product near a wall outlet where the plug can be easily unplugged.
■
Avoid plugging the product into an outlet on the same circuit as a photocopier or air control system
that regularly switches on and off, or on an outlet controlled by a wall switch or timer.
■
Do not let the power cord become damaged or frayed. Do not place objects on top of the cord, do
not step on or run over the cord, and keep the cord straight at the ends.
■
If you use an extension cord with the product, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere
rating.
■
Always turn off the product using the
flashing before unplugging the product or cutting off power to the electrical outlet.
■
Do not unplug the power cord until the
return to the home position and the ink may dry out, preventing the product from printing.
■
If you will not be using the product for a long period, turn off the product and unplug the power
cord from the electrical outlet.
■
Place the product on a flat, stable surface that extends beyond its base in all directions. It will not
operate properly if it is tilted at an angle.
■
Leave enough space around the product for the cables, to raise the document cover, and to load and
fully eject the paper.
■
Avoid locations that are subject to high temperature or humidity, rapid changes in temperature or
humidity, shocks or vibrations, water, dust, or dirt.
■
Do not place or store the product outdoors.
■
Do not place the product near excessive heat sources, strong light, or in direct sunlight.
■
Do not block or cover openings in the case or insert objects through the slots in the product.
■
Keep the product away from potential sources of electromagnetic interference, such as loudspeakers
or the base units of cordless telephones.
■
When connecting the product to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a connector
in the wrong orientation may damage both devices connected by the cable.
■
Do not touch the flat white cable or ink tubes inside the product.
■
Do not move the print head by hand; this may damage the product.
■
Do not put your hand inside the product while it is printing.
■
Do not spill liquid on the product or use the product with wet hands.
■
Do not use aerosol products that contain flammable gases inside or around the product. Doing so
may cause fire.
■
Do not use alcohol or thinner to clean the components and the case of the printer; these chemicals
can damage the printer.
10
Important Safety Instructions
®
product, read and follow these safety instructions.
P power button, and wait until the
P power light is off. Otherwise, the print head may not
P power light stops