Allen + Roth Harlow 67692W-619068 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
2. Ensure the gasket (B) is on the bottom of the new
faucet (A). Place the faucet assembly (A) through
the mounting hole in sink.
NOTE: If the sink is uneven, use silicone under
the gasket (B).
3. Secure the faucet to the sink using the mounting
nuts (C) provided. Hand-tighten only.
4. Make Connections to water lines:
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with a 3/8
in. O.D. ball-nose riser (1). Use wrenches to tighten
the connections. Do not overtighten.
2
3
1
4
1
3
5
A
B
C
2
2
1
1