Thank you for choosing one of our Algam Lighting products. Please read this user's manual carefully and follow
the instructions to avoid danger or damage to the unit due to mishandling. Keep this user's guide for future
reference.
SAFETY INSTRUCTIONS
The symbols shown above are internationally accepted symbols to warn of potential hazards related to the use of
electrical dangers associated with the use of electrical equipment. If any of these symbols are present on your
device, please read the following instructions:
0.5
m
PROTECTION CLASS IP65
The equipment is designed and tested for IP65 protection in accordance with EN 60529.
This degree of protection corresponds to resistance to dust and water (jets of water) allowing the
product to be used outdoors. However, it does not protect against immersion.
For ports with protective caps: handle the protective caps on the connectors with care, as they
ensure that the product is dust- and water-tight. When the port is not in use, check that the
connectors are free of dust and moisture, and close the protective caps carefully.
The IP65 rating does not guarantee the device's resistance to outdoor conditions (UV, heat,
temperature variations...).
ATTENTION !
Before using your equipment, we recommend that you read all the instruc-
tions in this manual.
ATTENTION !
This device produces an intense and powerful light. Risk to the eyes. Do not
look directly into the beam.
DANGER !
Hazardous voltage, risk of electric shock. Do not open the product. To reduce
the risk of electric shock do not expose this equipment to rain or moisture.
ATTENTION !
Risk of burns. The exterior of the unit can become very hot. Do not touch
within 10 minutes of use.
ATTENTION !
Fire hazard. Keep all combustible and flammable materials away from the
materials away from the unit during operation.
DANGER !
Safety hazard. This appliance presents a significant risk of injury. Follow the
safety instructions.
Place the unit at least 50cm away from flammable materials and walls.
P.12