Publicidad
Idiomas disponibles
Idiomas disponibles
1. Fill the water tank with water and descaler to the MAX level (the proportion of water and descaler is 4:1,
details refer to the instruction of descaler.) Please use "household descaler".
2. Put the portafilter (no coffee powder inside) and jug in place.
3. Press the on/off button to turn on the appliance, wait unitll its indicator light illuminates solidy
4. Press the coffee button and make two cups of coffee (about 2 Oz). Then press the coffee button again and
wait for 5s.
5. Press the steam button. Wait until the indicator light of the steam button illuminates solidly. Turn the
steam knob anticlockwise for 2 minutes (Place a cup under the steam wand to collect the water.) and then
turn back to off position "
Let the descalers deposit in the unit at least 15 minutes.
6. Restart the unit and repeat the steps of 3-5 at least 3 times.
7. Press the on/off button. Wait until the indicator light of the on/off button illuminates solidly. Press the
coffee button to brew until no descaler is left.
8. Fill the water tank with tap water in the MAX level, repeat the steps of 3-5 for 3 times (it is not necessary to
wait 15 minutes in step of 5), and then brew until no water is left in the tank.
9. Repeat the step of 8 at least 3 times to make sure the piping is clean.
TROUBLE SHOOTING
Trouble
Water leaks from the
bottom of the appliance.
Water leaks out of the outer
side of the filter.
Acid (vinegar) taste exists in
espresso coffee.
The appliance cannot work
anymore.
The steam cannot froth.
SPECIFICATIONS
Supply voltage: 220-240V ~ 50-60Hz
Power consumption: 1100W
o
" to stop making steam. Press the on/off button to turn off the unit immediately.
Cause
There is too much water in the drip
tray.
The appliance is in malfunction.
There is some coffee powder on
the filter edge.
Not clean correctly after cleaning
mineral deposits.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
The power outlet is not plugged
well.
The steam indicator is not
illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk.
Corrections
Please clean the drip tray.
Please contact with the authorized
service facility for repairing.
Get rid of them.
Clean the appliance according to the
section "before the first use" for
several times.
Please use fresh coffee powder, or
store unused coffee powder in a cool,
dry place. After opening a package of
coffee powder, reseal it tightly and
store it in a refrigerator to maintain its
freshness.
Plug the power cord into a wall outlet
correctly. If the appliance still does
not work, please contact with the
authorized service facility for
repairing.
Only after the steam indicator is
illuminated, the steam can be used to
froth.
Use high and narrow cup.
Use whole milk or half-skimmed milk.
- 7 -
Publicidad
