Pepperl+Fuchs Tab-Ex 04 Pro DZ2 Manual Del Usuario página 12

Replacing the S Pen nib
If the nib is dull, replace it with a new one.
1.
Firmly hold the nib with the tweezers and remove it.
2.
Insert a new nib into the S Pen.
Be careful not to pinch your fingers with the tweezers.
• Do not reuse old nibs. Doing so may cause the S Pen to malfunction.
• Do not press the nib excessively when inserting the nib into the S Pen.
• Do not insert the round end of the nib into the S Pen. Doing so may cause damage to
the S Pen or your device.
• Do not bend or apply excessive pressure with the S Pen while using it. The S Pen may
be damaged or the nib may be deformed.
• Do not hard press on the screen with the S Pen. The pen nib may be deformed.
• If you use the S Pen at sharp angles on the screen, the device may not recognise the
S Pen actions.
• If the S Pen is not working properly, take it to a Pepperl+Fuchs Service Centre.
• You can insert the S Pen into the left side of the Ex-protective Cover. Refer to Storing
the S Pen for more information.
12