Publicidad
Idiomas disponibles
Idiomas disponibles
Engine Timing Tool Set for VAG Audi & VW V6 TDI
GENERAL
This tool kit contains essential tools that are required when replacing the cylinder head gasket, timing
chain and checking the engine timing.
Further information regarding the item and a list of suitable motors and models can be found on our
website:
www.bgstechnic.com
SAFETY ADVICE
•
Do not use the set if any parts are missing or damaged.
•
Only use this tool for the purpose for which it is intended.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be
caught up in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine
for two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 8275
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
