Coby CPA89FD Manual De Usuario página 3

Note: When the battery power level is low, the RGB light may not work, and
the volume will turn lower, indicating that it requires charging. When the
speaker's battery power gets used up, it will automatically power off.
Powering on/off
Slide the Power Switch to the "ON" position to turn on the speaker. Once
the speaker is on, it will default to Bluetooth mode, and the RGB light will be on.
To turn off the speaker, slide the Power Switch to the "OFF" position, and
the RGB light will be off.
Bluetooth Mode
Bluetooth connection with your device
When the speaker is on, it will automatically enter Bluetooth pairing mode (If the
speaker is in other playback modes, repeatedly press the Mode button M until the
status LED indicator quickly flashes blue to enter Bluetooth mode.). Turn on Bluetooth
in your device's settings and search for ''CPA89FD'', then tap ''CPA89FD'' to connect.
Enter Bluetooth
pairing mode
Connected to a device
(Successfully paired
with your device).
NOTES: 1. Press and hold the
from the current connected device.
2. The speaker will automatically be paired with your last successfully con-
nected media device the next time it is turned on.
True Wireless Stereo connection
The CPA89FD supports True Wireless Pairing, which lets you stream your
music from your device to two CPA89FD speakers acting as left and right audio
channels for definitive and immersive stereo sound quality. To pair two speakers
together, follow the steps below:
1. Bring the two speakers next to each other and turn them on. Make sure
neither speaker is connected to any other Bluetooth devices, such as your
phone, tablet, or laptop.
2. Press the button twice on either speaker until you hear a tone notification,
which means both speakers are paired with each other successfully.
3. Turn on your Bluetooth in your device's settings and search for ''CPA89FD",
then tap ''CPA89FD'' to connect. After they are successfully connected, you
can stream music from your phone to both speakers.
?
?
Quickly flashing blue (Status LED indicator)
Bluetooth mode tone notification
Steady blue (Status LED indicator)
Connected tone notification
button for 2 seconds to unpair the speaker
EN 02