USE
1. Pull out the ush valve to use the toilet. (Fig 4)
2. After use, ush the toilet by moving the piston pump up and down or by pressing the
orange ush button for seconds when water supply is connected. (Fig 5)
3. Close the ush valve after ushing. (Fig 6)
4
EMPTYING
The waste holding tank must be emptied when the indicator turns red. It is advisable
to empty the waste holding tank earlier.
Note!
Do not allow the waste holding tank to become too full.
1. Make sure that the ush valve is closed. Pull the waste tank out from the toilet. (Fig 7)
2. Carry the holding tank to a normal toilet or to a legal waste disposal site.
3. Remove the emptying spout cap. Empty the waste. (Fig 8)
4. After emptying, ush the waste holding tank and clean the ush valve thoroughly with
water. Slide the waste tank back into the toilet. (Fig 9)
4
www.serenelifehome.com
5
7
8
6
9