Gymax GYM09703 Manual Del Usuario página 2

Please retain these instructions for future reference.
NOTICE
● Do not stand on or use any part of this item as a step ladder.
● Firmly secure all bolts, screws, and knobs before use
● Reconfirm that all bolts, screws, and knobs are secure every 90 days.
● Be aware that some parts are heavy and have sharp edges.
● If any parts are missing, broken, damaged, or worn, stop using this
product until repairs are made and/or factory replacemernt parts are
installed.
● Do not use this item in a way inconsistent with the manufacturer's
instructions.
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
SCISSORS
HARDWARE
1 2
M6X 15mm
SCREW
x60
4 5
M6 X 25mm
SCREW
x6
02
1 PERSON UP TO 45 MIN.
ASSEMBLY ASSEMBLY
3
M6 WASHER M6 WINGNUT
x66 x66
RUBBER
BUMPER
x1
PARTS
A
CURVED END PANEL
x8
PRODUCT ASSEMBLY - A
Connect two part A end panels with five part 1 screws and five part 2
1
washers, then secure with five part 3 wingnuts. Leave the bottom
connector holes open.
x5
1
B
SIDE PANEL
x4
x5
x5
3
2
x2
A
03