Alpina BLA-1109 Manual De Instrucciones página 4

MAIN PARTS
1. Decorative plate
2. Upper housing
3. Bottom housing
4. Temperature control knob
5. No-stick Cooking Plates
6. Power light(Red)
7. Ready light(green)
USING THE APPLIANCE
Before using the appliance for the first time, peel off any promotional
materials and packaging materials, and check that the cooking plates
are clean and free of dust. If necessary, wipe over with a damp cloth.
For best results, pour a teaspoon of vegetable oil on to the non-stick
plates. Spread over with an absorbent kitchen towel and wipe off any
excess oil.
When your appliance is heated for the first time, it may emit slight
smoke or odor. This is normal with many heating appliances. This
does not affect the safety of your appliance.
• Insert the plug into the power outlet, allow the temperature knob to
Dark, you will notice that the power and the ready light will go on,
indicating that the appliance has begun preheating
• Allow your appliance to pre-heat until the ready light goes out.
This indicates that the cooking plates have reached the correct
temperature for cooking.
• Open the lid, put the meat or other foods on the bottom cooking
plate.
• Close the lid. The ready light will go on again.
• Cook for about 3 to 8 minutes, the ready light goes off again, or